By having us thoroughly maintain your heating and cooling system, you will be saving money as well as reaping the many benefits listed below!
Check out these awesome benefits of this preventive maintenance program:
**Maintains the life of your system **Stocked service trucks
**Potential problems can be spotted before trouble  **Peace of mind
   and major expenses occur **Discounts towards any future repairs
**Increased heating & cooling efficiency **Possible increased indoor air quality
**Discounted after hours service **Utility costs kept at a minimum
**Priority dispatching for needed repairs **Better indoor air quality
Below is a list of items covered in our semi-annual Energy Service Agreement program.
AIR CONDITIONING
1.  CONDENSER COIL fins will be straightened and cleaned as required. VALUE TO YOU - Dirty condensor coils raise refrigerant pressure higher than needed, increasing your electric bill and decreasing compressor life.
2.  EVAPORATOR COIL will be inspected and cleaned as required. VALUE TO YOU - Evaporator coils become dirty because air filters only collect a portion of the particles in the air. Even a small amount of dirt can decrease efficiency and increase operating costs. This is also a major cause of compressor failure. Customer should replace properly sized air filter each month or highly consider electronic air filters, or high efficiency pleated filters.
3.  BLOWER WHEELS will be inspected. VALUE TO YOU - Dirty blower wheels reduce air flow, causing longer operating time and increased cost. This problem can lead to lost comfort and compressor failure.
4.  REFRIGERANT CHARGE checked by superheat/subcooling method. VALUE TO YOU - A low or high refrigerant charge can easily go unnoticed and increase operating costs. An improper charge can cause compressor shut down. 
5.  AIR FILTER will be replaced/washed with customer provided VALUE TO YOU - A restricted air filter can cause your air conditioning unit to waste energy and shorten the compressor's life.
6.  BELTS AND PULLEYS will be inspected and adjusted as required. VALUE TO YOU - Loose belts and worn pulleys decrease air flow, increase operating costs and shorten the compressor's life. Belts crack and break with age.
7.  LUBRICATION of motors and bearings. VALUE TO YOU - Improper lubricated rotating equipment will eventually fail.
8.  THERMOSTAT will be checked and calibrated as required. VALUE TO YOU - Improperly calibrated thermostats allow the unit to run longer than necessary. Every degree your air conditioning operates below 78 degrees can add 5 to 8% to the cost of cooling.
9.  CONTROLS AND SAFETIES will be inspected and tested VALUE TO YOU - Controls and safeties that do not function properly can increase operation cost and cause other components to fail.
10.  MOTORS will be cleaned and inspected. VALUE TO YOU - Dirty motors are less efficient and will fail sooner.
11.  CAPACITORS will be tested. VALUE TO YOU - Bad capacitors can lead to compressor and motor failure.
12.  CONDENSATE DRAINS will be cleaned and algae tabs added. VALUE TO YOU - Algae can plug a condensate drain which can cause expensive water damage. 
13.  CRANKCASE HEATER will be operationally checked. VALUE TO YOU - Crankcase heaters that do not work can lead to compressor failure.
14.  RELAYS AND CONTACTORS will be inspected. VALUE TO YOU - Worn contacts and loose wire connections can lead to a motor or compressor failure.
15.  UNIT DISCONNECT will be inspected. VALUE TO YOU - A worn or overheated disconnect blows fuses and is dangerous.
16.  UNIT WIRING will be inspected and loose connections tightened. VALUE TO YOU - Loose connections can lead to a motor or compressor failure.
17.  TEMPERATURES AND PRESSURES will be taken and recorded. VALUE TO YOU - An accurate record of your equipment's vital data can indicate potential problems, which can be eliminated.
HEAT PUMPS
HEAT PUMPS WILL RECEIVE ALL OF THE AIR CONDITIONING SERVICES (1-17) PLUS:
18.  DEFROST TIMER will be checked VALUE TO YOU - A defrost timer that is not working properly can cause a loss of heat and can shorten the compressor's life.
19.  REVERSING VALVE will be operationally checked. VALUE TO YOU - A reversing valve that is not operating properly can waste energy and cause a loss of heat.
20.  AUXILIARY HEAT STRIPS will be checked. VALUE TO YOU - Heat strips that are not operating properly can cause a loss of heat or increase electric costs higher than necessary
GAS HEATING
1.  HEAT EXCHANGER will be cleaned and inspected for cracks and deterioration. VALUE TO YOU - Heat exchangers can develop cracks with age. If they exist, there is a risk of serious illness from the toxic fumes emitted.
2.  AIR FILTER will be replaced/washed with customer provided VALUE TO YOU - A restricted air filter can cause your air conditioning unit to waste energy and shorten the compressor's life.
3.  BURNERS will be cleaned in place. VALUE TO YOU - Dirty burners can cause poor combustion. You pay for useful heat that 'goes up the stack!'
4.  THERMOCOUPLE will be checked. VALUE TO YOU - A defective thermocouple will cause the furnace to shut down leaving you without heat.
5.  FAN SWITCH will be checked and adjusted as needed VALUE TO YOU - A fan switch that is not properly adjusted can waste energy or cause nuissance fan cycling.
6.  PILOT will be cleaned and adjusted as necessary. VALUE TO YOU - Weak or dirty pilots can easily be extinquished causing the furnace to shut down.
7.  SAFETY CONTROLS will be operationally checked. VALUE TO YOU - Safety controls that do not operate can cause dangerous problems.
8.  GAS LINE will be leak checked from the furnace shut off valve to the burners. VALUE TO YOU - Undetected gas leaks are dangerous.
9.  COMBUSTION AIR openings will be checked. VALUE TO YOU - Blocked or restricted combustion air openings can be dangerous.
10.  FLUE PIPE will be inspected. VALUE TO YOU - Flue pipe corrosion or leaks are dangerous.
11.  SECURE ALL PANELS VALUE TO YOU - Loose panels can increase operating costs and cause a dangerous condition.
12.  THERMOSTAT will be checked and calibrated as required. VALUE TO YOU - Defective or improperly calibrated thermostats affect comfort and operating costs.
13.  TEMPERATURES AND PRESSURES will be checked and recorded. VALUE TO YOU - An accurate record of your equipment's vital data can indicate potential problems, which can be eliminated.